伺服压机实拍

Is the servo electric cylinder the core component of a servo press? Its Function and Selection Criteria

A servo electric cylinder converts the rotational motion of a servo motor into linear thrust via a reduction gearbox and a ball screw; it serves as the actuator for a servo press. However, a press is not merely an electric cylinder: the rigidity of the frame, pressure sensors, displacement feedback, and evaluation software collectively determine the quality of the press fit.

Read More
WL 系列电缸实拍

How to Operate a Servo Press? A Standard Press-Fitting Process and Parameter Settings

The standard cycle of a servo press is as follows: workpiece positioning and verification, rapid advance, contact detection, press-fitting phase, pressure holding, return stroke, curve evaluation, and data archiving. The key to operation lies not in the sequence of button presses, but in the coordination of speed, target positions, and target pressures during each phase…

Read More
设备触摸屏实拍

What Is a Pressure Sensor in a Servo Press? Measurement Range, Accuracy, and Installation Guidelines

Pressure sensors in servo presses are typically installed between the ram and the drive train; they convert the pressing force into an electrical signal in real time and, together with a displacement encoder, generate a force-displacement curve. They serve as a quality control element rather than a simple overload protection device.

Read More
伺服电动缸实拍

Leakage Current and Grounding Anomalies in Servo Presses: Troubleshooting Sequence

High-frequency leakage current flowing through EMI filter capacitors to protective ground is a common occurrence in servo drives and is considered normal; however, a live chassis or frequent tripping of the ground-fault circuit interrupter (GFCI) constitutes a malfunction and should be troubleshot by following a four-step process covering the power supply, grounding, cabling, and motor.

Read More

Technical Features of Servo Electric Cylinders: How to Interpret Thrust, Stroke, and Repeatability

To understand a servo electric cylinder specification sheet, you just need to focus on three key factors: maximum thrust determines what can be pressed; effective stroke determines how deep the press can go; and repeatability determines how accurately the press operates. These three factors are interdependent, so you cannot simply select the highest value for each one individually.

Read More

What Causes Temperature Rise in Servo Presses? The Actual Impact on Precision and Service Life

Temperature rise is primarily caused by copper losses in the motor, friction in the lead screw, and oil churning losses in the gearbox. During continuous, high-frequency press-fitting, thermal expansion of the drive train directly alters the final press-fitting position, making it the most common hidden cause of accuracy drift.

Read More