Key Conclusions:A servo electric cylinder converts the rotational motion of a servo motor into linear thrust via a reduction gearbox and a ball screw; it serves as the actuator for a servo press. However, a press is not merely an electric cylinder: the rigidity of the frame, pressure sensors, displacement feedback, and evaluation software collectively determine the quality of the press fit.
Principles of Operation and System Configuration
The WINTRL WL series electric cylinders are available in the following bore sizes: 45, 50, 65, 75, 95, and 110. The 75-bore model has a maximum thrust of less than 700 kg and a stroke of up to 1,000 mm.
When selecting a press, first determine the cylinder bore diameter by applying a safety factor of 1.5–2 times the peak process thrust; long-term operation at full load will accelerate the temperature rise of the lead screw and shorten its service life.
Precautions for On-Site Use
- The installation method alters the load-bearing path: C-frame models typically use front flanges, while four-column models commonly employ a combination of foot plates and flanges for mounting.
- The U-shaped motor configuration reduces the axial dimensions but requires an additional synchronous belt; the direct-coupled configuration offers greater rigidity and is suitable for high-frequency press-fitting.
- If you only purchase electric cylinders and assemble them yourself, without force-displacement closed-loop control and decision-making software, it is difficult to consistently achieve a repeatability of ±0.02 mm.
WINTRL Servo Press Main Series Quick Reference
| Series | Rated Thrust | Pressing Stroke | Structure / Key Configuration |
|---|---|---|---|
| WLC1 C-Type Desktop Machine | 0.2–2.0 T | 200 / 250 / 300 mm | Type C Enclosure, 0.75 / 1.0 / 1.5 kW |
| WLS1 Four-Column Desktop Machine | 0.3–2.0 T | 200 / 250 mm | Standard profile frame, up to 2.5 kW |
| WLS3 Four-Column | By Model | 200 or 250 mm | 75-cylinder helical gear reducer, 250 mm opening, approximately 120 kg |
| WLW1 Aluminum Alloy Desktop Machine | Starting at 0.1 T | 200 mm and above | Lightweight desktop structure, customizable |
| Complete Machines / Custom Series | 1.3 / 3 / 5 / 8T | According to the plan | Rack-mounted, three-panel, four-post, floor-standing, gantry |
Related Equipment and Further Reading
Combined Shanghai WINTRL By looking at an actual model, you can gain a more intuitive understanding of the points mentioned above:Servo Press Motor Rotor Press-Fit Machine、Positioning Pins and Steel Ball Press-Fit Equipment、WL Series Servo Electric Cylinders。
For systematic principles and selection methods, see The Complete Guide to Servo Presses; For a complete list of models and specifications, see Product Center。
Frequently Asked Questions
Are electric cylinders and servo presses the same thing?
No. An electric cylinder is an actuator, while a press is a complete piece of equipment that includes a frame, sensors, controls, and quality inspection systems.
Can the 75-cylinder be used directly with the 1.3T press?
75. For cylinders with a nominal thrust of less than 700 kg, machines rated at 1.3 metric tons or higher typically require a larger cylinder bore or a redesign of the drivetrain.
If you need to calculate thrust, stroke, or the determination window based on your workpiece, or if you would like to request technical documentation, please visitDownload Product Brochures、prescription, or directly through Contact Us Submit your operating conditions, and engineers from Shanghai WINTRL Automation will provide product selection recommendations. For company background, seeAbout Us。